INDEKS GRADASI SEBAGAI PARAMETER UNTUK MENENTUKAN GRADASI AGREGAT BETON ASPAL

Authors

  • Arief Setiawan
  • Latif Budi Suparma
  • Agus Taufik Mulyono

DOI:

https://doi.org/10.26593/jtrans.v17i1.2700.%25p

Abstract

Abstract

 

Usually selected aggregate gradation is the mid range of specification. Gradation Index is a new parameter to predict aggregate gradation based on performance of asphalt concrete. The purpose of this study is to formulate the relationship between gradation index and aggregate gradation. The aggregate gradation of asphalt concrete was determined according to Indonesian Highway Specification (2010). Five gradations were selected and made the relationship between sieve size and  percent passing cumulatif to get five equations. The result showed that the models of five aggregate gradation are power function with coefficient of determination greater than 0.9 and the two contants (a and b) can be used to obtain aggregate gradation.

 

Keywords: gradation index, asphalt concrete, aggregate gradation, sieve size

 

 

Abstrak

 

Gradasi agregat pada campuran beraspal umumnya dipilih berada di tengah rentang spesifikasi. Indeks Gradasi merupakan parameter yang diusulkan untuk digunakan dalam memprediksi gradasi agregat berdasarkan kinerja campuran beton aspal. Tujuan penelitian ini adalah merumuskan hubungan antara Indeks Gradasi dan gradasi agregat. Spesifikasi gradasi ditentukan berdasarkan persyaratan yang terdapat pada Spesifikasi Umum Direktorat Jenderal Bina Marga (2010). Lima jenis gradasi dipilih dan dibuat hubungan antara ukuran saringan serta persen lolos kumulatif. Hasil penelitian ini menunjukkan bahwa model untuk lima gradasi agregat memberikan koefisien determinasi lebih besar daripada 0,9 serta konstanta a dan b yang dapat digunakan untuk menentukan gradasi agregat.

 

Kata-kata kunci: indeks gradasi, beton aspal, gradasi agregat, ukuran saringan

Downloads

Issue

Section

Articles