PEMELIHARAAN KOREKTIF MESIN CETAK OFFSET 4 WARNA PADA CV. ARIES ANUGRAH KARYA UTAMA

Authors

  • Luthfi Irdiansyah Program Studi Manajemen, Universitas Jenderal Achmad Yani
  • Eka Ludiya Program Studi Manajemen, Universitas Jenderal Achmad Yani

DOI:

https://doi.org/10.26593/jab.v18i1.5535.1-16

Keywords:

Maintenance, Corrective Maintenance, Availability

Abstract

This study aims to analyze the corrective maintenance of the 4 Color Offset Printing machine at CV.Aries Anugrah Karya Utama. Another goal is to find out to what extent the corrective maintenance of the 4 Color Offset Printing machine has been running effectively and efficiently. The method used in this research is descriptive with a qualitative approach, using purposive sampling technique. The technique of collecting data by doing observation, interview and documentation, to test the validity and reliability by using triangulation of sources, triangulation of techniques and time triangulation. The results of this study indicate that the availability of corrective maintenance has not reached the predetermined target which has a percentage of less than 90%. In corrective maintenance preparations it was found that the preparation of spare parts was not optimal due to incomplete inventory, furthermore the documentation and corrective maintenance procedures were not optimal. In this case there is still much that needs to be improved in the corrective maintenance of the 4 color offset printing machine on CV.Aries Anugrah Karya Utama , such as corrective maintenance preparation needs to be improved, corrective maintenance procedures need to be designed properly and corrective maintenance documentation needs to be better managed.

References

Ahmet, J., Khan, S., Starr, A., & Rushton, K. (2020). Maintenance Optimisation Model at the Equipment Type level. (November).

Alawaysheh, I., Alsyouf, I., Tahboub, Z. E. A., & Almahasneh, H. S. (2020). Selecting Maintenance Practices Based on Environmental Criteria: A Comparative Analysis of Theory And Practice In The Public Transport Sector In UAE/DUBAI. International Journal of Systems Assurance Engineering and Management, 11(6), 1133–1155.https://doi.org/10.1007/s13198-020-00964-1

Ariani, F., Nasution, D. M., & Sibarani, H. (2020, May). Corrective Maintenance of Worm Gear a Screw Press Machine with a capacity of 30 tons per hour using Wear Analysis and its response to Conus Pressure. In IOP Conference Series: Materials Science and Engineering (Vol. 851, No. 1, p. 012006). IOP Publishing.

Bahria, N., Dridi, I. H., Chelbi, A., & Bouchriha, H. (2020). Joint design of control chart, production and maintenance policy for unreliable manufacturing systems. Journal of Quality in Maintenance Engineering.

Bratadharma, A. (2020, September 26). Indeks Manufaktur Indonesia Tertinggi ke-2 di ASEAN. Retrieved from medcom.id: https://www.medcom.id/ekonomi/bisnis/aNra3nEK-indeks-manufaktur-indonesia-tertinggi-ke-2-di-asean

Cachon, G. P., Girotra, K., & Netessine, S. (2020). Interesting, Important, and Impactful Operations Management. Manufacturing and Service Operations Management, 22(1), 214–222. https://doi.org/10.1287/msom.2019.0813

Cheng, G., & Li, L. (2020). Joint optimization of production, quality control and maintenance for serial-parallel multistage production systems. Reliability Engineering & System Safety, 204, 107146.

Dorval, M., & Jobin, M. H. (2019). Exploring Lean Generic and Lean Healthcare Cultural Clusters. International Journal of Productivity and Performance Management, 69(4), 723–740. https://doi.org/10.1108/IJPPM-01-2019-0057

Erkoyuncu, J. A., Khan, S., Eiroa, A. L., Butler, N., Rushton, K., & Brocklebank, S. (2017). Perspectives On Trading Cost And Availability For Corrective Maintenance At The Equipment Type Level. Reliability Engineering and System Safety, 168, 53–69. https://doi.org/10.1016/j.ress.2017.05.041

Errandonea, I., Beltrán, S., & Arrizabalaga, S. (2020). Digital Twin For Maintenance: A Literature Review. Computers in Industry, 123. https://doi.org/10.1016/j.compind.2020.103316

Hasanudin, M. (2020). Analisis Penerapan Total Productive Maintenance Menggunakan Overall Equipment Effectiveness dan Fuzzy Fmea Pada Mesin Extruder di PT Xyz Bogor. 1(2), 53–58.

Hasri, H., & Hazimah. (2020). Pengukuran Efektivitas Mesin Molding di PT. XYZ.

Heizer, J., & Render, B. (2015). Manajemen Operasi edisi 11. Jakarta: Salemba Empat

Ivanov, D., & Tsipoulanidis, A. (2019). Global Supply Chain and Operations Management.

Li, M., Wang, M., Kang, J., Sun, L., & Jin, P. (2020). An Opportunistic Maintenance Strategy For Offshore Wind Turbine System Considering Optimal Maintenance Intervals of Subsystems. Ocean Engineering, 216(May), 108067. https://doi.org/10.1016/j.oceaneng.2020.108067

Meriah, R., Barkaoui, K., Liu, G., & Driss, O. B. (2019). On Modelling and Evaluation of Corrective and Preventive Maintenance Policies of Unreliable Manufacturing Systems. 2019 6th International Conference on Control, Decision and Information Technologies, CoDIT 2019, 1752–1757. https://doi.org/10.1109/CoDIT.2019.8820665

Pratama, A. (2020, September 28). Kalah Saing, BUMN Percetakan Ngeluh Tak Kebagian Proyek. Retrieved from okezone: https://economy.okezone.com/read/2020/09/28/320/2284893/kalah-saing-bumn-percetakan-ngeluh-tak-kebagian-proyek

Sartika, D., & Syamsudin, A. (2020). Analisis Pemeliharaan Mesin Cco (Crude Coconut Oil) Studi Kasus Pada Pt . Spo Agro Resources. 6(1), 10–19.

Siew, C. Y., Chang, M. M. L., Ong, S. K., & Nee, A. Y. C. (2020). Human-oriented Maintenance And Disassembly In Sustainable Manufacturing. Computers & Industrial Engineering, 150, 106903. https://doi.org/10.1016/j.cie.2020.106903

Siregar, I., & Nasution, A. A. (2020, May). Application of Preventive Maintenance in Planning Maintenance of Tablet Printing Machines in Drug Companies. In IOP Conference Series: Materials Science and Engineering (Vol. 851, No. 1, p. 012003). IOP Publishing.

Vathoopan, M., Johny, M., Zoitl, A., & Knoll, A. (2018). Modular Fault Ascription and Corrective Maintenance Using a Digital Twin. IFAC-PapersOnLine, 51(11), 1041–1046. https://doi.org/10.1016/j.ifacol.2018.08.470

Yuselin, N., Rosyidi, E., & Pratama, A. Y. (2020). Meningkatkan Availability Rate Dengan Mengurangi Downtime Untuk Penerapan Total Productive Maintenance (TPM) Pada Area Mixing. 10(8), 11.

Downloads

Published

2022-07-30

Issue

Vol. 18 No. 1 (2022)

Section

Articles

License

Copyright (c) 2022 Jurnal Administrasi Bisnis

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The submitted article has never been previously publish in scientific journals, proceedings, or other electronic journals. The copyright of the accepted articles are belongs to Jurnal Administrasi Bisnis (JAB).