Perancangan Model Stacker Crane Flexible Manufacturing System untuk Pembelajaran di Institusi Pendidikan
DOI:
https://doi.org/10.26593/jrsi.v10i1.4258.45-54Abstract
Flexible Manufacturing System (FMS) is one of the modern production systems that support the implementation of Industry 4.0. An educational institution plans to build an FMS model for learning the modern production systems. The FMS is a manufacturing system consisting of a set of automatic workstations connected to a material handling system where all activities are controlled by a computer system. The material handling system consists of a material storage system and a transportation system, one example of a transportation system is the stacker crane. In this research, the stacker crane model has been built which consists of three main components, which are the bottom frame, the mast, and the carriage. This component is equipped with stepper motors, leadscrews that are controlled by the micro controller and an application on Android. The stacker crane model is tested to retrieve and deliver the stereofoam material model to the destination which is controlled by the user using an application on Android. The characteristics of the stacker crane model can move the workpiece with a maximum error of 2 mm in the positive x-axis direction, 2 mm in the negative x-axis movement, up to 2 mm positive y-axis, downward at negative y-axis direction 2 mm.
References
A. Setiawan, R. Wangsaputra, Y.Y. Martawirya, A.Hakim Jalim., "An Object-Oriented Modeling Approach for Production Scheduling on CNC-Machines in Flexible Manufacturing System to Maximize Cutting Tool Utilization", Journal of Advanced Manufacturing Systems, Vol.18, No.2 (2019) 293-310.
M. Hilmanto, A. Setiawan and T. E. N. Sitepu, "Model Penjadwalan Flexible Manufacturing System dengan Memperhatikan Sistem Penanganan Material" Jurnal Telematika - Institut Teknologi Harapan Bangsa, (IESC) 2018.
M. Elroy and A. Setiawan, "Perancangan Model Real Time - Shop Floor Control System Untuk Flexible Manufacturing System", Tugas Akhir, Teknik Industri - Institut Teknologi Harapan Bangsa, 2019.
A. P. Utomo, A. Setiawan dan F. Z. Gunarto,, "Perancangan Sistem Pengisian dan Pembacaan Data Informasi Benda Kerja pada Flexible Manufacturing System dengan Memanfaatkan Teknologi Radio Frequency Identification, Jurnal Telematika - Institut Teknologi Harapan Bangsa, Vol.13 No.12., 2018.
R. Febrian and A. Setiawan, "Pembuatan Model Automatic Pallet Changer Mesin Computer Numerical Control Menggunakan Mikrokontroler", Tugas Akhir, Teknik Industri - Institut Teknologi Harapan Bangsa, 2019.
A. N. Bawono and A. Setiawan, "Model Automated Guided Vehicle Untuk Pengangkutan barang Otomatis Menggunakan Robot Line Follower dan Robotic ARM", Tugas Akhir, Teknik Industri - Institut Teknologi Harapan Bangsa, 2019.
J. Andika, Pengontrolan Robot Berbasis Arduino Menggunakan Android, Jakarta: Universitas Mercu Buana, 2013.
F. S. Hadisantoso and A. Tamsir, "Perancangan Sistem Penyimpanan dan Pengambilan Barang Otomatis Menggunakan Arduino Berbasis Web Database," ELEKTRA, Vol. 3, No. 1, pp. 25-36, 2018.
A. Fatoni and D. B. Rendra, "Perancangan Prototype Sistem kendali Lampu Menggunakan Handphone Android Berbasis Arduino," PROSISKO, vol. 1, pp. 23-29, 2014..
A. D. Pratama, Kontroler Lengan Robot Menggunakan Motor Servo dan Motor Stepper Dengan Masukan 3 Axis, Yogyakarta: Universitas Sanata Dharma, 2017.
T. E. Sitepu and A. Setiawan, "Penjadwalan Job Dua Stages dan penentuan Perkakas potong pada Flexible Manufacturing System Menggunakan Metode Genetic Algorithm," Jurnal Telematika Institut Teknologi Harapan Bangsa, Vol. 12, No. 2, pp. 123-132, 2016.
