Analisis Risiko Keselamatan dan Kesehatan Kerja Pada Pemeliharaan dan Perawatan Sistem Utilitas Bangunan Gedung Icon Mall Gresik

Authors

  • Gatot Basuki HM Institut Teknologi Adhi Tama Surabaya

DOI:

https://doi.org/10.26593/jrsi.v10i1.4387.55-66

Abstract

Maintenance of the Icon Mall Gresik building is carried out in order to provide convenience for consumers when shopping, traders and building tenants. Every maintenance and maintenance activity has a risk of work accidents that may occur for workers. The research objective is to determine risk assessment and risk identification and determine the status of system failure and its determination. After analyzing the existing risks and system failures that can occur, then making suggestions for improvements with mitigation actions that are expected to reduce the rate of work accidents. The results showed that there were five groups of building utility maintenance jobs with 116 job risks. The results of risk measurement showed that 7 jobs were categorized as high risk. Meanwhile, risk mitigation is divided into 4 levels which result in improvement proposals, namely using Personal Protective Equipment (PPE) Safety Harness, repairs by managers and periodic building maintenance to avoid utility disruptions, providing boundary lines on engine room holes and carrying out work in accordance with standards. structured operational procedures by the management of the Icon Mall Gresik Building, especially for workers in the engineering department.

References

Alviora, V. V., Indrayadi, M., & Pratiwi, R. (2020). Analisa Risiko Pada Pekerjaan Geoteknik Di Proyek Perpanjangan Runway Bandar Udara Supadio. JeLAST : Jurnal Elektronik Laut, Sipil, Tambang, 7(2), 1–9.

AS/NZS4360. (2004). The Australian And New Zealand Standard on Risk Management.

Dainur. (1993). Materi - materi Pokok Ilmu Kesehatan Masyarakat. Widya Medika.

Fahirah. (2010). Sistem Utilitas Pada Konstruksi Gedung. Jurnal SMARTek.

HM, G. B. (2019). Identifikasi Bahaya Bekerja Pada Departemen Casting Dengan Hazard Identification Risk Assessment And Risk Control Di PT. Prima Alloy Steel. KAIZEN : MANAGEMENT SYSTEMS & INDUSTRIAL ENGINEERING JOURNAL, 2(1), 1–7.

Ilmansyah, Y., Mahbubah, N. A., Widyaningrum, D., Studi, P., Industri, T., Gresik, U. M., & Bahaya, P. (2020). Penerapan Job Safety Analysis sebagai Upaya Pencegahan Kecelakaan Kerja dan Perbaikan Keselamatan Kerja di PT Shell Indonesia. Profisiensi, 8(1), 15–22.

Johannes, A. D. (2011). Studi Pemeliharaan Bangunan Gedung Pascasarjana Universitas Atma Jaya Yogyakarta. Universitas Atma Jaya Yogyakarta.

Marwadi, E., Aulia, T. B., & Abdullah. (2018). Kajian Konsep Operasional Pemeliharaan Gedung SMA Bina Generasi Bangsa Meulaboh Aceh Barat. Teknik Sipil, 1(4), 811–822.

Setiawan, T. H., & Pusphita, S. D. (2012). Manajemen Pemeliharaan Pusat Belanja (Studi Kasus Cihampelas Walk Bandung). Teknik Sipil, 8.

Yücenur, G. N., Atay, İ., Argon, S., & Gül, E. F. (2019). Integrating Fuzzy Prioritization Method and FMEA in the Operational Processes of an Automotive Company. International Journal of Knowledge-Based Organizations, 9(3), 14–32.

Downloads

Published

2021-04-29