Pendekatan FMEA dalam Analisa Risiko Perawatan Sistem Bahan Bakar Mesin Induk: Studi Kasus di KM. Sidomulyo
DOI:
https://doi.org/10.26593/jrsi.v9i3.4075.189-200Abstrak
The fuel system is one of the main engine support systems which is very important in the operation of the KM Sidomulyo main engine. Main engine on ships are operated 24 hours a week or more. The operation main engine needs special treatment of the components on the main engine to prevent failure during operation. Failure Mode and Effect Analysis (FMEA) is a method that can be used to identify the priority scale in maintaining a machine by evaluating the risk of failure that occurs on the machine. This study applies FMEA to determine the priority scale for the maintenance of the KM Sidomulyo main engine fuel system. The results of the identification using FMEA, namely the injector and fuel filter components are components that must be prioritized for maintenance. The Risk Priority Number (RPN) values of the injector and fuel filter components are 192 and 168, respectively. Maintenance priority is based on the component RPN value is above the critical RPN value of the main engine fuel system and includes the priority component on the Pareto diagram. The type of maintenance applied to the injector component is checking dirty fuel which can cause the injector to operate less optimally. While the fuel filter component is cleaning the deposits on the fuel filter cartridge. It is recommended that the inspection of other components be carried out so that the condition of the main engine fuel system has good reliability.Referensi
Alhaddad, S. H., & Dianta, mustofa K. (2015). Studi Kasus Pembakaran Tidak Sempurna pada Mesin Diesel tipe mak 8m 551ak milik pt . xxx. Seminar Nasional Teknik Mesin, 453–455.
Alwi, M. R. (2016). Reliability Centered Maintenance Dalam Perawatan. Jurnal Riset Dan Teknologi Kelautan (JRTK), 14(1), 77–86.
Amry, R. A., Renta, P. P., & Nofridiansyah, E. (2017). Analisa Kelayakan Usaha Penangkapan Ikan Menggunakan Alat Tangkap Payang (Seine Net) Menggunakan Alat Bantu Rumpon Di Pantai Malabero Kota Bengkulu. Jurnal Enggano, 2(2), 129–142.
Arabian-Hoseynabadi, H., Oraee, H., & Tavner, P. J. (2010). Failure Modes and Effects Analysis (FMEA) for wind turbines. International Journal of Electrical Power and Energy Systems, 32(7), 817–824.
Artana, K. B., & Ishida, K. (2002). Optimum Replacement and Maintenance Scheduling Process for Marine Machinery in Wear-Out Phase : A case Study on Main Engine Cooling Pumps. Journal of the Kansai Society of Naval Architects, 238, 173–184.
Awal, Z. I., & Hasegawa, K. (2015). Analysis of Ship Accidents due to Marine Engine Failure - Application of Logic Programming Technique (LPT). Journal of The Japan Institute of Marine Engineering, 50(6), 744–751.
Baharuddin. (2016). Perancangan Simulasi Kontrol Otomatis Distribusi Bahan Bakar Tangki Harian Pada KM. Madani Nusantara. Jurnal Riset Dan Teknologi Kelautan (JRTK), 14(1), 61–76.
Balaraju, J., Raj, M. G., & Murthy, C. S. (2019). Fuzzy-FMEA risk evaluation approach for LHD machine-A case study. Journal of Sustainable Mining, 18(4), 257–268.
Bevilacqua, M., & Braglia, M. (2000). Analytic Hierarchy Process Applied to Maintenance Strategy Selection. Reliability Engineering and System Safety, 70(1), 71–83.
Cicek, K., Turan, H. H., Topcu, Y. I., & Searslan, M. N. (2010). Risk-based Preventive Maintenance Planning using Failure Mode and Effect Analysis (FMEA) for marine engine systems. 2nd International Conference on Engineering System Management and Applications, ICESMA.
Darmawan, A., Rapi, A., & Ali, S. (2017). Analisis Perawatan Untuk Mendeteksi Risiko Kegagalan Komponen Pada Excavator 390D. Jurnal Ilmiah Teknik Industri, 15(2), 109.
Fathoni, A., & Hakim, L. (2019). Penerapan Rcm Dengan Analisa Kualitatif (FMEA) Sebagai Studi Kegagalan Sistem Pembangkit (Genset) Pada Sebuah Hotel Bintang Empat Di Rokan Hulu. APTEK, 11(1), 69–77.
Faturachman, D., Mustafa, S., Octaviany, F., & Novita, T. D. (2014). Failure Mode and Effects Analysis of Diesel Engine for Ship Navigation System Improvement. International Journal of Service Science, Management and Engineering, 1(1), 6–16.
Gunawan, C. V., & Tannady, H. (2016). Analisis Kinerja Proses Dan Identifikasi Cacat Dominan Pada Pembuatan Bag Dengan Metode Statistical Proses Control (Studi Kasus : Pabrik Alat Kesehatan Pt.Xyz, Serang, Banten). J@Ti Undip : Jurnal Teknik Industri, 11(1), 9–14.
Hadi, E. S., & Untung, B. (2008). Analisa Keandalan Sistem Bahan Bakar Motor Induk Pada Km. Leuser. Kapal, 5(2), 123–135.
Handani, D. W., & Uchida, M. (2014). Modeling Optimum Operation of Ship Machinery by Using System Dynamics. Journal of The Japan Institute of Marine EngineeringMarine Engineering, 49(1), 132–141.
Hasbullah, H., Kholil, M., & Santoso, D. A. (2017). Analisis Kegagalan Proses Insulasi Pada Produksi Automotive Wires (Aw) Dengan Metode Failure Mode and Effect Analysis (Fmea) Pada Pt Jlc. Sinergi, 21(3), 193.
Hidayah, N. Y., & Ahmadi, N. (2017). Analisis Pemeliharaan Mesin Blowmould Dengan Metode RCM Di PT. CCAI. Jurnal Optimasi Sistem Industri, 16(2), 167.
Huda, A. T. N., Novareza, O., & Andriani, D. P. (2014). Analisis Aktivitas Perawatan Mesin HDS di Stasiun Gilingan Menggunakan Maintenance Value Stream Map (MVSM) (Studi Kasus Pg. Kebon Agung Malang). Jurnal Rekayasa Dan Manajemen Sistem Industri, 3(2), 311–321.
Imanuell, R., & Lutfi, M. (2019). Analisa Perawatan Berbasis Keandalan Pada Sistem Bahan Bakar Mesin Utama KMP. Bontoharu. JST (Jurnal Sains Terapan), 5(1).
Islam, R., Anantharaman, M., Khan, F., & Garaniya, V. (2019). Reliability Assessment of a Main Propulsion Engine Fuel Oil System-What are the Failure Prone Components? TransNav, 13(2), 415–420.
Kusdiantoro, K., Fahrudin, A., Wisudo, S. H., & Juanda, B. (2019). Perikanan Tangkap Di Indonesia: Potret dan Tantangan Keberlanjutannya. Jurnal Sosial Ekonomi Kelautan Dan Perikanan, 14(2), 145.
Lasabuda, R. (2013). Pembangunan Wilayah Pesisir Dan Lautan Dalam Perspektif Negara Kepulauan Republik Indonesia. Jurnal Ilmiah Platax, I(2), 92–101.
Latif, M. Z., Priharanto, Y. E., Prasetyo, D., & Muhfizar. (2018). Preliminary Hazard Analysis Dan Fault Tree Analysis Untuk Identifikasi Penyebab Kegagalan Sistem Pelumas Mesin Induk Kapal Penangkap Ikan. Airaha, 7(2), 77–87.
Liu, Y., Kong, Z., & Zhang, Q. (2018). Failure Modes and Effects Analysis (FMEA) for the Security of the Supply Chain System of the Gas Station in China. Ecotoxicology and Environmental Safety, 164(5), 325–330.
Manalu, R. B., Budiarto, U., Yudo, H., Teknik, F., Diponegoro, U., & Simulation, M. C. (2016). Analisa Perawatan Sistem Distribusi Minyak Lumas Berbasis Keandalan Pada Kapal Km.Bukit Siguntang Dengan Pendekatan RCM (Reliability Centered Maintenance). Jurnal Teknik Perkapalan, 4(1), 53–63.
Mostafa, M. F., & Fahmy, S. A. (2020). Maintenance Strategy Selection Using AHP: A Case Study in the Oil and Gas Industry. 7th International Conference on Industrial Engineering and Applications, ICIEA, 1049–1053.
Nusantara, G. Y. (2015). Pengaruh Efek Perawatan Terhadap Jadwal Perawatan Sistem Pendukung Mesin Induk Pada Kapal Dengan Menggunakan Pemodelan Dinamik Sistem. In Jurusan Teknik Sistem Perkapalan, Institut Teknologi Sepuluh Nopember.
Priharanto, Y. E., Latif, M. Z., & Saputra, R. S. H. (2017). Penilaian Risiko pada Mesin Pendingin di Kapal Penangkap Ikan Dengan Pendekatan FMEA. Jurnal Airaha, 6(1), 24–32.
Puthillath, B., & Sasikumar, R. (2012). Selection of Maintenance Strategy Using Failure Mode Effect and Criticality Analysis. International Journal of Engineering and Innovative Technology (IJEIT), 1(6), 73–79.
Ramadhani, G. S., Yuciana, & Suparti. (2014). Analisis Pengendalian Kualitas Menggunakan Diagram Kendali Demerit (Studi Kasus Produksi Air Minum Dalam Kemasan 240 Ml Di Pt Tiw). Jurnal Gaussian, 3(3), 401–410.
Sahoo, T., Sarkar, P. K., & Sarkar, A. K. (2014). Maintenance Optimization for Critical Equipments in process industries based on FMECA Method. International Journal of Engineering and Innovative Technology (IJEIT), 3(10), 107–112.
Saputra, R. S. H., Priharanto, Y. E., & Abrori, M. Z. L. (2018). Failure Mode and Effect Analysis (FMEA) Applied for Risk Assessment of Fuel Oil System on Diesel Engine of Fishing Vessel. ARPN Journal of Engineering and Applied Sciences, 13(21), 8414–8420.
Sasmita, S., Martasuganda, S., Purbayanto, A., & Hestirianoto, T. (2013). Keselamatan Kerja pada Operasi Penangkapan Ikan Cantrang Nelayan Tanjung Sari, Kabupaten Rembang. Buletin PSP, 21(1), 11–17.
Setiawan, & Iwan. (2014). Fmea Sebagai Alat Analisa Risiko Moda Kegagalan pada Magnetic Force Welding Machine Me-27.1. Pengelolaan Instalasi Nuklir, 13, 31–41.
Situngkir, D. I., Gultom, G., & Tambunan, D. R. S. (2019). Pengaplikasian FMEA untuk Mendukung Pemilihan Strategi Pemeliharaan pada Paper Machine. Flywheel : Jurnal Teknik Mesin, 5(2), 1–5.
Soewardi, H., & Wulandari, S. A. (2019). Analysis of Machine Maintenance Processes by using FMEA Method in the Sugar Industry. IOP Conference Series: Materials Science and Engineering, 528(1), 0–7.
Sukwadi, R., Wenehenubun, F., & Wenehenubun, T. W. (2017). Pendekatan Fuzzy FMEA dalam Analisis Faktor Risiko Kecelakaan Kerja. Jurnal Rekayasa Sistem Industri, 6(1), 29.
Surya, A., Agung, S., & Charles, P. (2017). Penerapan Metode FMEA (Failure Mode And Effect Analysis) Untuk Kualifikasi Dan Pencegahan Resiko Akibat Terjadinya Lean Waste. Jurnal Online Poros Teknik Mesin, 6(1), 45–57.
Suryaningrat, D. (2019). Identifikasi Risiko pada Okra Menggunakan Failure Mode and Effect Analysis (FMEA) di PT. Mitratani Dua Tujuh Di Kabupaten Jember. Jurnal Agroteknologi, 13(1), 25–33.
Wannawiset, S., & Tangjitsitcharoen, S. (2019). Paper Machine Breakdown Reduction by FMEA and Preventive Maintenance Improvement: a Case Study. IOP Conference Series: Materials Science and Engineering, 530(1).
Wilastari, S., & Puryadi. (2017). Analisa Penyebab Terjadnya Kegagalan Pembakaran Awal Pada Ketel Uap Bantu. Majalah Ilmiah Gema Maritim, 19(1), 1–19.
