Product Quality Improvement Tofu Bandung in Tahu NR Using The Seven Tools and Heart Method

Authors

DOI:

https://doi.org/10.26593/jrsi.v11i1.5069.35-46

Keywords:

HEART, Quality Control, Seven Tools

Abstract

Tahu NR is a small factory that produces tofu Bandung, where the problems that often occur in Tahu NR are problems quality product tahu bandung like texture, dirty, and color defects. Because of these problems, it is necessary to control the quality of tofu Bandung products. The purpose of this study is to find out what factors cause defects in tofu Bandung products and identify activities that have a probability of error to workers in the production process of tofu Bandung as a basis for providing suggestions for improvements with the seven tools and the HEART method. The results of this study indicate that the factors that influence the defects of Bandung tofu products are human, machine, method, material, and environmental factors. The human factor is the most dominant factor because almost the entire production process is done manually, the number of workers is small with a large number of requests, and the frequent change of workers. All activities in the production process have a probability of error, this is because almost the entire production process in Tahu NR is done manually by workers. The greatest probability of error is in the printing process which has a potential error in the imperfect tofu printing process which can cause the tofu product to have defects in the texture with a HEP value of 0.311.

 

 

Author Biographies

Egar Naufal Ari Satya, Universitas Singaperbangsa Karawang

Program Studi Teknik Industri, Fakultas Teknik

Wahyudin, Universitas Singaperbangsa Karawang

Program Studi Teknik Industri, Fakultas Teknik

Rianita Puspa Sari, Universitas Singaperbangsa Karawang

Program Studi Teknik Industri, Fakultas Teknik

References

Abdurahman, N. C., & Arifin, A. (2020). Analisis Pengendalian Kualitas Produksi Kantong Semen Dengan Seven Tools. Jurnal Industri Kreatif (Jik), 4(01), 97-108.

Astuti, F., & Wahyudin. (2021). Perbaikan Kualitas Produk Gentong Menggunakan Metode Seven Tools. Barometer, 6(2), 307-312.

Aulawi, H., & Faisal, M. (2016). Analisis Pengendalian Kualitas Roti Di Home Industri Mahabah Garut. Jurnal Kalibrasi, 14(10).

Casidy, D. (2018). Analisa Tingkat Keandalan Operator Menggunakan Metode HEART (Human Error Assessment and Reduction Technique) pada Pabrik Tahu Mantep Cianjur Jawa Barat. Jurnal PASTI, 12(2), 142-153.

Fauziah, A., Harsono, A., & Liansari, G. R. (2014). Usulan Perbaikan Kualitas Menggunakan Metode Six Sigma Untuk Mengurangi Jumlah Cacat Produk Tahu Pada Perusahaan Pengrajin Tahu Boga Rasa. Jurnal Online Institut Teknologi Nasional, 4(2), 166-176.

Ivanto, M. (2012). Pengendalian Kualitas Produksi Koran Menggunakan Seven Tools Pada PT. Akcaya Pariwara Kabupaten Kubu Jaya Jurnal, Jurusan Teknik Elektro, Fakultas Teknik, Universitas Tanjungpura.

Kholil, M., & Prasetyo, E. D. (2017). Tinjauan Kualitas Pada Aerosol Can Ø 65 X 124 Dengan Pendekatan Metode Six Sigma Pada Line ABM 3 Departemen Assembly. Sinergi, 21(1), 53-58.

Momon, A. (2012). Implementasi Sistem Pengendalian Kualitas Dengan Metode Seven Tools Terhadap Produk Shotblas Pada Proses Cast Wheel di PT. XYZ. Solusi, 10(21).

Rahayuningtyas, W., & Sriyanto. (2018). Analisis Pengendalian Kualitas Pada Produk Tahu Baxo Ibu Pudji Menggunakan Metode New Seven Tools (Studi Kasus Pada CV. Pudji Lestari Sentosa. Semarang: Universitas Diponegoro.

Riani, L. P. (2016). Analisis Pengendalian Kualitas Produk Tahu Putih (Studi Kasus Pada Home Industri Tahu Kasih di Kabupaten Trenggalek). Akademika, 14(1), 58-63.

Rujianto, K., & Wahyuni, H. C. (2018). Pengendalian Kualitas Produk Dengan Menggunakan Metode SQC dan HRA Guna Meningkatkan Hasil Produksi Tahu di IKM H. Musauwimin. Prozima, 2(1), 1-18.

Safitri, D. M., Astriaty, A. R., & Rizani, N. C. (2015). Human Reliability Assessment Dengan Metode Human Error Assessment And Reduction Technique Pada Operator Stasiun Shroud PT. X. Jurnal Rekayasa Sistem Industri, 4(1), 1-7.

Sari, R. P., & Puspita, D. (2018). Analisis tingkat kecacatan produk lever assy parking brake menggunakan metode statistical quality control (SQC). Journal of Industrial Engineering and Management Systems, 11(2), 77-83.

Tasman, B., & Yulius, H. (2016). Analisis Pengendalian Kualitas Kantong Semen Tipe Pated Bag Menggunakan Metode Seven Tools (7QC) Pada PT. Semen Padang. Jurnal Teknologi, 6(1), 51–63.

Wisnubroto, P., & Rukmana, A. (2015). Pengendalian Kualitas Produk Dengan Pendekatan Six Sigma Serta New Seven Tools Sebagai Usaha Pengurangan Kecacatan Produk. Jurnal Teknologi, 8(1), 65-74.

Yusuf Widharto, Y., Derry Iskandari, D., & Denny Nurkertamanda, D. (2018). Analisis Human Reliability Assessment Dengan Metode HEART (Studi Kasus PT ABC). J@ TI UNDIP, 13(3 (2018)), 141-150.

Downloads

Published

2022-04-26